oVirt - Configure oVirt Node
2014/06/15 |
Configure oVirt Node.
This example shows to configure on the environment below.
(1) ovirt.srv.world
[10.0.0.50] ⇒ oVirt Control Server ( up to 4G memory ) (2) node01.srv.world [10.0.0.40] ⇒ oVirt Node ( KVM Host configured ) (3) client.srv.world [10.0.0.30] ⇒ ClientPC ( Desktop Environment configured )
|
|
[1] | |
[2] | Configure as an oVirt Node. |
[root@node01 ~]#
yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm
[root@node01 ~]#
[root@node01 ~]# yum -y install vdsm mv /etc/sysconfig/network-scripts/ifcfg-br0 /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
[root@node01 ~]#
vi /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt # change bridge name DEVICE= ovirtmgmt
[root@node01 ~]#
vi /etc/sysconfig/network-scripts/ifcfg-eth0 # change BRIDGE= ovirtmgmt
|